Technosmart TS-SV-CAM02 Manual De Uso página 9

Main menu
Format
Language
LCD AUTO OFF
AUTO OFF
Default setting
(System reset)
Frequency
Date Input
USB
Version
Connecting to computer/notebook
The device is able to synchronize with computers.
Connect the USB to mini USB cable to the Mini USB Port
connect the other end of the cable to the USB port of your computer. Once the device
is connected to the computer, power ON the device; the LED indicator
blue. A "Disk Drive icon" will appear on the LCD display
connection. The device will now appear in the list of connected devices on your
computer.
Please note:
• The device will start charging once connected to your computer (see chapter:
Sub-menu
MAIN SETUP
Next Menu
English
French
German
Dutch
Italian
Portuguese
Spanish
OFF, 1,3,5Min
OFF, 1,3,5Min
50Hz / 60Hz
Next menu
Next menu
VIEW
Description
Cancel = back to main menu
WARNING!!! Selecting "Execute" will
DELETE all data stored on the Micro
SD card.
English
Français
Deutsch
Nederlands
Italiano
Portuguės
Español
Automatically switch off the LCD in 1,3
or 5 minutes or OFF = Always ON.
Automatically switch off the device in
1,3 or 5 minutes or OFF = Always ON.
Cancel = back to main menu
WARNING!!! Selecting "Execute" will
RESET all system settings to factory
mode.
Select 50Hz or 60Hz (50Hz
recommended for EU)
Select the desired value using the
9
LEFT and RIGHT
Press the OK button
next item and press the MENU button
10
again to go back to the setup menu.
Select disk drive to connect the unit
directly to the computer as a USB flash
drive. Select PC cam to use the unit as
a PC camera.
Firmware version information
15
of the device and
, to indicate successful
2
13
buttons.
11
to go to the
16 will turn
EN 07