Description; Field Of Application; Characteristics - Vimar 20511 Manual De Instrucciones

Description - Field of application - Characteristics

1. DESCRIPTION.

Touch screen colour for control and command ,complete with support for installation in a box of 8 modules.

2. FIELD OF APPLICATION.

Touch screen device for use in the By-me automation system for controlling lights, roller shutters, climate, scenarios
and, if load control is also installedin the system, for displaying and forcing the status of the loads themselves.
The appliance also allows control of the burglar alarm system, if present, with similar modes and functions to
those of a digital keypad.
The touch screen is configured by means of EasyTool Professional LT software, connecting the interface 01998.U
to the special connector on the front of the device. The touch screen allows the supervision and control of all the
devices in the By-me system which are configured on the control panel.

3. CHARACTERISTICS.

• Display TFT 4,3".
• Rated supply voltage: 12-29 Vdc (connect to the AUX output of the power supply 01801)
• Power input:
- 60 mA --> 29 Vdc
- 120 mA --> 12 V dc
• Terminals:
- power supply 12-29 Vdc
- TP bus
• Possible functions:
- ON/OFF switch (lights on/off)
- roller shutter control
- dimmer control (light dimming)
- scenario activation
- climate control
- display load power input (load control)
- forcing of the individual load control groups (forcing of their status)
- display of the burglar alarm system status (active, inactive, partialized, in alarm)
- keypad for typing in PIN codes for turning the burglar alarm system totally or partially on/off.
• Consist with:
- By-me 8-module flush and surface mounting control units, rel. 2.0 and next.
- thermostats, rel. xxxxxxxxx5.0 and next.
22