Operation; With An Rts Control Point - SOMFY Lighting Modulis Ramp RTS Manual De Instrucciones

Lighting Modulis RTS Ramp

6. Operation

6.1 With an RTS control point from the Modulis range
1) To switch the light on:
- Press the Up button:
2) To switch the light on:
- Press the Up button:
3) To switch the light on directly to the "my" preset favourite light
intensity setting
- Press the my button.
4) To increase the light intensity
- Move the thumbwheel up:
- The light intensity begins on the minimum light intensity level
possible, i.e. on a night-light level;
- The light intensity increases every time the thumbwheel is
moved.
5) To decrease the light intensity
- Move the thumbwheel down:
- The light intensity decreases every time the thumbwheel is
moved;
- The minimum light intensity corresponds to a "night-light" level.
Note: Once the "night-light" level has been reached, move the
thumbwheel down to switch the light off.

6.2 With an RTS control point

6.2.1 Standard control point
N.B.: A standard control point is a three button control point (Up/
Stop-my/Down).
1) To switch the light on:
- Press the Up button:
2) To switch the light off:
- Press the Down button:
3) To switch the light on directly to the "my" preset favourite light
intensity setting
- Press the my button.
4) To increase the light intensity
- Press and hold the Up button:
- The light intensity increases as long as the button is held.
- Release the Up button when the required light intensity is reached.
5) To decrease the light intensity
- Press and hold the Down button:
- The light intensity decreases as long as the button is held.
- Release the Down button when the required light intensity is
reached.
Caution: Once the "night-light" level has been reached, keep the Down
button pressed to switch the light off.
36
5061612X00_LMR_RTS_livre.indb 36
1
2
3
+
4
+
5
1
2
3
+
4
+
5
Copyright © 2009 Somfy SAS. All rights reserved.
Installation guide
ON
OFF
my
100%
-
0%
100%
-
0%
ON
OFF
my
100%
-
0%
100%
-
0%
30/04/09 18:44:51