A - Preliminary Operations - Olimpia splendid Peler 8 Instrucciones Para La Instalación, Uso Y Mantenimiento

3.3.a - Preliminary operations

• Place the appliance on a stable and not inclined base, at least 15
cm. from the wall or from any other object, in order to ensure the
correct air circulation. Place it on a water-resistant surface since the
possible water leakage could damage furniture or the floor.
• Do not place the appliance directly on carpets, towels, blankets or
other absorbent surfaces.
• Insert the plug in the power socket; the appliance will beep and the
display will show LED (B1), indicating that the appliance is connected
to a power source.
Before electrically connecting the appliance, make sure the plate data
correspond to those of the electricity distribution network.
3.3.b - Filling
It is necessary to add water in the tank (7) before the cooling/humidifier
function is activated.
To add water, remove the water reservoir first (7):
- To remove the water compartment (7) from the body of the appliance
(Fig. G):
• rotate the hook (6) by 90° (fig.H);
• slide the reservoir out (7);
• Pour water into the compartment (7);
• replace the reservoir (7) into the appliance and rotate the hook (6)
downwards (fig.H).
• Check the water level in the tank (7) through the water level gauge
(12) (fig.L).
• Do not fill the tank (7) beyond the maximum indicated level.
• Always use clean water.
• The appliance could produce a slight smell or the water in the tank (7)
could be slightly coloured during first use; this events are normal and
absolutely harmless for the user's health.
EN - 16
PELER 8