Goobay 39511 Instrucciones De Uso página 18

User Manual
Fig. 16:
Fig. 17: Mounting of front protective grille
Fig. 18: Ready mounted table fan
17 Pushbuttons for setting the blower intensity
19 Pin for rotation adjustment
End of mounting.
18
together.
10. Insert the Phillips-head screw with
lens head (8 a) through the two
nut (8b).
The Phillips head screw should only be
the nut.
11. Pull the resulted ring onto the edge of
the rear protective grille (14).
The edge of the protective grille must lie in
Fig. 17 a).
12. Insert the front guard grille (6) into the
Fig. 17 b).
13. Tighten the Phillips screw further
clockwise using a Phillipps
screwdriver. Fig. 17 c).
18 Plinth