Clasificaciones De Gabinates; Clasificaciones Ip; Clasificaciones Nema - DEEP SEA ELECTRONICS DSE4510 MKII Manual De Operación

2.13.1 CLASIFICACIONES DE GABINATES

2.13.1.1 CLASIFICACIONES IP

The modules specification under BS EN 60529 Degrees of protection provided by enclosures
IP65 (Front of module when module is installed into the control panel with the optional sealing gasket).
IP42 (front of module when module is installed into the control panel WITHOUT being sealed to the panel)
First Digit
Protection against contact and ingress of solid objects
0 No protection
1 Protected against ingress solid objects with a
diameter of more than 50 mm. No protection
against deliberate access, e.g. with a hand, but
large surfaces of the body are prevented from
approach.
2 Protected against penetration by solid objects with
a diameter of more than 12 mm. Fingers or similar
objects prevented from approach.
3 Protected against ingress of solid objects with a
diameter of more than 2.5 mm. Tools, wires etc.
with a thickness of more than 2.5 mm are
prevented from approach.
4 Protected against ingress of solid objects with a
diameter of more than 1 mm. Tools, wires etc. with
a thickness of more than 1 mm are prevented from
approach.
5 Protected against harmful dust deposits. Ingress of
dust is not totally prevented but the dust must not
enter in sufficient quantity to interface with
satisfactory operation of the equipment. Complete
protection against contact.
6 Protection against ingress of dust (dust tight).
Complete protection against contact.

2.13.1.2 CLASIFICACIONES NEMA

NOTA: No existe una equivalencia directa entre las clasificaciones IP / NEMA. Las cifras
de IP mostradas son aproximadas.
12 (Front of module when module is installed into the control panel with the optional sealing gasket).
2 (Front of module when module is installed into the control panel WITHOUT being sealed to the panel)
1 Provides a degree of protection against contact with the enclosure equipment and against a limited amount of falling
dirt.
IP30
2 Provides a degree of protection against limited amounts of falling water and dirt.
IP31
3 Provides a degree of protection against windblown dust, rain and sleet; undamaged by the formation of ice on the
enclosure.
IP64
3R Provides a degree of protection against rain and sleet:; undamaged by the formation of ice on the enclosure.
IP32
4 (X) Provides a degree of protection against splashing water, windblown dust and rain, hose directed water; undamaged
by the formation of ice on the enclosure. (Resist corrosion).
IP66
12/12K Provides a degree of protection against dust, falling dirt and dripping non corrosive liquids.
IP65
13 Provides a degree of protection against dust and spraying of water, oil and non corrosive coolants.
IP65
Instalación
Second Digit
Protection against ingress of water
0 No protection
1 Protection against dripping water falling vertically. No harmful
effect must be produced (vertically falling drops).
2 Protection against dripping water falling vertically. There must
be no harmful effect when the equipment (enclosure) is tilted at
an angle up to 15° from its normal position (drops falling at an
angle).
3 Protection against water falling at any angle up to 60° from the
vertical. There must be no harmful effect (spray water).
4 Protection against water splashed against the equipment
(enclosure) from any direction. There must be no harmful effect
(splashing water).
5 Protection against water projected from a nozzle against the
equipment (enclosure) from any direction. There must be no
harmful effect (water jet).
6 Protection against heavy seas or powerful water jets. Water
must not enter the equipment (enclosure) in harmful quantities
(splashing over).
Page 31 of 117 057-260 ISSUE: 1.1