Fender Twinolux Instrucciones De Funcionamiento página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
5
U
4
GB
K.
POWER CORD — Connect to a grounded outlet in accordance
with the voltage and frequency specifications shown on the
amplifier information label.
The amplifier information label is located inside the amplifier
cabinet on the left-hand side, when viewed from the rear of
the amplifier.
L.
FUSE — Protects the amplifier from electrical faults. Replace
a blown fuse only with the type and rating specified on the
amplifier information label.
M. FOOTSWITCH JACK — Plug the included footswitch in here to
enable remote on-off switching of the Vibrato effect.
N. FENDER® GROOVE TUBES® — Your new Fender amplifier
comes equipped with the highest quality tubes available
sourced
from
various
worldwide. Because of occasional irregularities
in supply, the specific tube type used in each
amplifier is subject to change without notice.
When replacing output tubes, please note the
specific tube markings on the original tubes
factory supplied with your amplifier. For
example, 6L6 output tube types used by Fender include, but
are not limited to: 6L6GC; 6L6WXT; 6L6GE; etc. The installation
of a different type may require significant adjustment by
TYPE:
PR 1169
PART NUMBERS:
8141500000 (120V, 60Hz)
8141505000 (220V, 50Hz) ARG
POWER:
REQUIREMENTS: 270W
INPUT IMPEDANCE:
INPUT 1: 1MΩ
SPEAKERS:
Two 8Ω, 12" Fender® Special Design Weber/Eminence® with AlNiCo magnets (P/N: 0064418000)
TUBES:
Two 6L6GC (P/N: 0059778000);
FUSE:
100V–120V VERSIONS: F 3A L, 250V
ACCESSORIES (INCLUDED):
FOOTSWITCH: 1-button, Vibrato on-off (P/N: 0994049000)
DIMENSIONS:
HEIGHT: 20.5 in (52.1 cm)
Chassis Bottom View
Chassis Bottom View
Rear of
Amplifier
5
6
U
L
4
6
GB
GC
manufacturers
Specifications
8141501000 (110V, 60Hz) TW
8141506000 (230V, 50Hz) EUR
Two 5U4GB (P/N: 0030031000);
WIDTH: 24.5 in (62.2 cm)
Product specifications are subject to change without notice.
fender.com
6
12
L
A
6
X
GC
C
7
Tube
Locations
a qualified technician to avoid a reduction in amplifier
performance and tube life span.
Additionally, Fender Groove Tubes tests and sorts many of
our output tubes based on their measured performance. The
sorted tubes are labeled with a fine rating of 1–10 and may also
be labeled with a coarse rating color of BLUE, WHITE or RED. A
pair of matched output tubes with the same fine rating (and
coarse rating, if applicable) as the original tubes will be the
perfect replacement. However, replacement tubes with a fine
rating within one number of the original tubes can be used
without re-biasing the amplifier.
If you have questions or concerns, please contact your Fender
dealer or authorized service center.
8141503000 (240V, 50Hz) AUS
8141507000 (100V, 50/60Hz) JPN
OUTPUT: 40W RMS into 4Ω @ 5%THD, 1kHz
INPUT 2: 136kΩ
Four 12AX7 (P/N: 0013334100);
220V–240V VERSIONS: F 1.6A L, 250V
DUST COVER: (P/N: 0064428000)
DEPTH: 9.0 in (22.9 cm)
12
12
12
A
A
A
X
X
X
7
7
7
8141504000 (230V, 50Hz) UK
8141509000 (220V, 60Hz) ROK
WEIGHT: 53 lb (24 kg)
7
7

Publicidad

Tabla de contenido
loading

Tabla de contenido