Maintenance; Technical Specifications - EMAK SR/AG 35 B45 Guía De Utilización

Retighten the drive belt after the first 5 hours of use and check the tension regularly.
1 - Remove the belt cover
2 - Loosen the bearing screws
3 - Pull the rotor downwards while holding it parallel to the ground
4 - Tighten the bearing screws
5 - Replace the belt cover
Weight
Net output*
For engine revolutions (rpm)
Nominal power
Nominal engine revolutions (rpm)
Guaranteed acoustic pressure level
(as per Directive 2000/14/CE)
Acoustic pressure level at driver's seat
(as per Directive EN 12733 : 2001)
Measurement uncertainty
Measured acoustic pressure level
(as per Directive 2000/14/CE, 2005/88/EC)
Measurement uncertainty
Vibration level transmitted to operator's hands
(as per Directive EN 12733 : 2001, EN 12096-D : 1997)
Measurement uncertainty
The engine power indicated in this document is the net output obtained by testing an engine
from a production run according to Standard SAE J 1349 at a given speed of rotation. The power
of another production run engine may differ from this indicated value. The actual power of an
engine installed in a machine depends on various factors such as the speed of rotation, the tem-
perature, humidity, atmospheric pressure and maintenance conditions and other factors.
VIII / MAINTENANCE
IX / TECHNICAL SPECIFICATIONS
B&S 550 Séries
8 - EN
30 Kg
3.00 KW
3600 rpm
2,6 KW
3100 rpm
100 dB (A)
82 dB (A)
± 1 dB (A)
92,1 dB (A)
± 1 dB (A)
1,28 m/s 2
± 0,1 dB m/s 2