Technical Specifications - Kathrein EXI 01 Guia De Inicio Rapido

Possible causes of faults, and their remedies
Problem
"Coax/Link" LED
does not light up
"Coax/Link" LED
does not light up
"Coax/Link" LED
does not light up
Technical Specifi cations
Type
Part no.
Input output
Frequency range
Frequency range IP (IEEE 1901)
Through loss
Screening factor
Permissible remote power feed at the output
Current consumption of the modem, max.
Power consumption at max. data rate
Power consumption in stand-by
Permissible current consumption of the multi-
switch from the receiver when remotely fed
Gross data rate
Permissible ambient temperature
Connections
Standards supported
Dimensions (W x L x H)
Packing unit/weight
Power supply unit
Nominal input voltage
Voltage secondary
Max. output current
Nominal input power (300/0mA load)
Satisfi es the directives
1) Of which actually used: 8-68 MHz
If the plug-in power supply unit is being used, the full feeder current of the receiver is available for the connected
2)
consumers
Possible cause
No coax connection
Damping between the modems
is too high
No pairing
MHz
MHz
dB
dB
V
mA
W
W
mA
2)
Mbit/s
°C
mm
Units/kg
V
V
mA
W
Solution
Ensure the coaxial cables are
connected without any short circuits
Check whether the selected port on the
RF outlet/multi-switch supports the
frequency range 5-68 MHz
The modem has not yet been assigned
a valid network key. Perform the
relevant points during commissioning
1 x
DC + IP & FM + TV + Sat
2-2150
2-68
1)
-
5-300 MHz > 85
300-470 MHz > 80
470-1000 MHz > 75
1000-2150 MHz > 55
F-connectors, RJ45, 5.5 x 2 mm latching plug
104 x 101 x 29.5
1 (10)/approx. 0.35
2009/125/EC in accordance with regulations 278/2009/EC,
2006/95/EC together with the standards current at the time
6 / 8
EXI 01
20510061
1 x
DC + FM + TV + Sat
87.5-2150
1
12-20
350
Approx. 4.2
Approx. 0.5
50
500
0 to + 40
IEEE1901
230
12
600
4.5/0.25
of delivery