Samson EXPEDITION EXPRESS EXL250 Manual Del Propietário página 18

Operating the EXPEDITION EXPRESS
USING THE DIGITAL EFFECTS
The EXPEDITION EXPRESS features a built-in, high quality, Digital Signal Processor offering studio grade reverb
and delay effects. You can add the digital effects to each input by using the channel's REVERB control. The fol-
lowing details the operation of the internal DSP effects:
1. Connect a mic or instrument to the desired channel, and adjust the volume and equalizer to your liking.
2. Now select the desired preset on the DSP selection switch. Set the DSP selection
switch to one of the following effects:
1. MEDIUM BRIGHT PLATE
2. BEST PLATE
3. MEDIUM DARK SPRING
4. SHORT PLATE
5. LONG BRIGHT SPRING
6. SLAPBACK 2
7. SLAPBACK w/VERB
8. ECHO LONG VERB
9. SLOW ST CHOR
10. BEST HALL 2
4. Once you have selected the desired effect preset, raise the Reverb control on the channels you wish to
apply the digital effect to.
NOTE: If the effect sound is distorted, lower the Reverb controls of each channel.
PLAYING BACK A CD USING THE CD INPUT
The EXPEDITION EXPRESS has a dedicated input for play-
ing back a stereo device such as a CD, Tape or Mini Disc.
Below is a description of how you can play back a CD,
Tape or MD using the EXPEDITION EXPRESS' CD input.
1. Turn the CHANNEL 3/4 VOLUME control all the way
down.
2. Adjust the MAIN VOLUME knob in the master sec-
tion to the "5" position.
3. Start playback on the CD, Tape or MD player, and
slowly raise the CHANNEL 3/4 VOLUME control to
set the desired level.
14