Entering The Overload Value For Amps (A) - GT -PM-04 Instrucciones De Uso

Entering the overload value for amps (A)

1. In the overload menu, you can switch
to A with the buttons VALUE / + or
DISPLAY / -.
2. Push the button HISTORY. The first
digit will blink on the display. You can
enter the desired value with the buttons
VALUE / + or DISPLAY / -.
3. Push the button HISTORY to switch to
the subsequent (second) digit. You can
enter the desired value with the buttons
VALUE / + or DISPLAY / -.
4. Enter the other numbers as described
in steps 9 and 10 until you have set the
desired value.
5. After entering the last digit, push the
button SET / OK to save the values and
return to the standard display.
107