Kenmore 100.40713310 Manual De Uso Y Cuidado página 5

OPERATING YOUR FOOD PROCESSOR
TO SLICE OR SHRED cont.
6. Start Processor.
- If using Large Pusher, make sure that it is joined together with Small Pusher.
Insert Pusher into Oval Food Chute to Max Fill line so that Pusher depresses
spring in Interlock Start Switch. Turn Control Knob to ON to start Processor.
Raise Pusher from Chute to stop Processor.
- If using Small Pusher, Processor will begin running once Control Knob is turned
to ON. Use Small Pusher to push food through Circular Chute. Turn Control Knob
to OFF to stop Processor.
7. When food processing is complete, turn Control Knob to OFF, unplug processor,
and wait for disc to stop rotating.
CAUTION: Before opening the Bowl Cover Assembly, be sure you
have turned the unit OFF and unplugged the cord.
8. Open bowl cover by turning clockwise, and remove disc with disc stem.
WARNING: Slicing/Shredding Disc is very sharp. Use caution when
handling.
9. Unlock Bowl by turning clockwise towards Unlock icon and lift bowl off.
Empty the processed food.
TO PROCESS LONG AND THIN FOOD ITEMS
CAUTION: Make sure control knob switch is turned to OFF and unit is
unplugged before use. Never use your hand to push food into processor.
The use of heavy pressure will not speed operation.
1. Lock the Bowl onto the Base as described in Assembly.
2. Slide the disc stem down onto the center post of the base, then place the slice/
shred disc, with the desired side facing up for either slicing or shredding, onto
the disc stem and push down. At this point the disc will be at the top of the bowl.
WARNING: Slicing/Shredding Disc is very sharp.
Use caution when handling.
3. Lock bowl cover assembly onto bowl.
4. Remove Small Pusher from Large Pusher. Insert Large Pusher into Oval Food Chute.
8
OPERATING YOUR FOOD PROCESSOR
TO PROCESS LONG AND THIN FOOD ITEMS cont.
5. Fill the Circular Food Chute with long and thin food items such as pepperoni,
carrots or celery.
6. Insert Small Pusher into Circular Food Chute above food. Plug cord into
electrical outlet.
WARNING: Food pusher must always be used when processing food.
NEVER use hand to push food directly.
7. Turn the Control Knob to ON, then press down lightly but firmly on Small Pusher
to feed items down and onto slice/shred disc. When the chute is empty, turn
the Control Knob to OFF.
8. When food processing is complete, turn Control Knob to OFF, unplug processor,
and wait for disc to stop rotating.
CAUTION: Before opening the Bowl Cover, turn the unit OFF and
unplug the cord.
9. Take off the bowl cover and carefully lift out disc and disc stem. Unlock Bowl
by turning clockwise towards Unlock icon and lift bowl off. Empty the processed
food.
FOOD PROCESSING TIPS - LIQUIDS
Hot foods and liquids under 12 ºF can be processed in the bowl. Anything over this 0
temperature is too hot. Be sure to process small amounts of liquids (2 cups or less)
at a time. Larger amounts may leak from the bowl.
9