Workzone 47625-15 Manual Del Usuario página 4

Dual halogen worklight with stand
3. To avoid electrical shock, do not use near water or in areas where water may
accumulate. Keep worklight at least 16 ft. from pools or spas. Keep plugs dry.
Use only Ground Fault Circuit Interrupter (GFCI) protected receptacles when
using this worklight in wet or damp locations. Receptacles are available with
built-in GFCI protection and are to be used for this measure of safety.
4. Always unplug worklight and allow lamp head to cool before replacing bulb.
5. The worklight lamp heads get hot very quickly. Only touch the power plug or
cushioned handle when turning the lamp heads ON or OFF.
6. Do not touch the glass lens, lens cover, wire lens guard, enclosure or any
metal part of the lamp head when worklight is turned on to avoid burns.
7. If exposed skin feels warm while you are in the lighted area, move the worklight
farther away. Do not remain in light if skin feels warm.
8. Do not look directly at the lighted lamp head to avoid eye injuries.
9. Always keep the worklight away from any flammable surfaces or materials.
10. Use only with 500-Watt or lower wattage bulb.
11. Never touch the halogen bulb surface with your bare hands. Unplug and allow
lamp head and bulb to completely cool before replacing bulb.
12. Do not operate worklight if it has a missing or damaged wire lens guard, lens
cover, lamp containment barrier or UV light filter. Contact customer service for a
replacement.
13. Read and follow all safety rules and operating instructions before first use of this
product.
READ ALL INSTRUCTIONS! SAVE THESE INSTRUCTIONS!
4
service@eurocentra.net
MODEL: 47625-15 PRODUCT CODE: 47625
AFTER SALES SUPPORT
05/2015
Safety
1 866 558 8096