General Electric GLE12HSLSS Manual Del Propietario E Instrucciones De Instalación página 26

Troubleshooting Tips... Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service. If
needed, service can be scheduled by visiting us online GEAppliances.com or calling 800.GECARES 800.432.2737.
In Canada visit GEAppliances.ca or call 800.561.3344.
Problem
Automatic icemaker does
not work
26
Accessory Installation Instructions
Possible Causes
Freezer compartment too warm.
Icemaker is not turned on.
Icemaker is not plugged in correctly. Check that the
Water line kinked.
Water supply turned off or not
connected.
Piled up cubes in the storage bin
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What to Do
After installing the kit, allow the refrigerator to
completely cool down for 24 hours. Once the
compartment is cool, the icemaker will begin ice
production.
Move the icemaker power switch to the ON position.
Power
Switch
icemaker cord plug is
fully inserted into the
socket. See "Plug in Clip Restraints onto
the icemaker" in the Locking Tabs
Installation Hook
Instructions.
Check that the plastic
water line running from the valve to the water tube
inlet is not kinked. See "Connect the water line" in the
Installation Instructions. A kink in the water line will
restrict flow to the water line.
After installing the kit, make sure the house water
supply to the refrigerator has been turned on.
Level cubes by hand.
Check that the valve wire adapter is completely
plugged onto the terminals on the water valve. See
"Attach the water valve" in the Installation Instructions.
Adapter
Icemaker
Feeler
Arm
Locking
Tabs
Valve Terminals
49-60769