Time And Date Setting; Computer Connection - Hawke NITE-EYE 2000 Manual De Usuario

TIME AND DATE SETTING

• The adjustment menu allows you to alter the time and date setting stored on photos and videos.
• While in photo or video mode, press and hold the "M" button for 3 seconds to enter the
adjustment menu.
• The Time Set menu is located underneath the screen brightness and lamp settings.
• Press the "M" button to cycle between settings and highlight Time Set.
• Press the left or right arrow button to access the time and date setting menu.
• With the top line highlighted use the left and right arrow buttons to select how the date format
is shown; DD/MM/YYYY, MM/DD/YYYY, or YYYY/MM/DD.
• Press the "ON/OK" button to confirm selection and move to the next setting of the menu.
• Press the left and right arrow buttons to change the values of the highlighted option.
• Once all date and time settings are correct, press the "ON/OK" button to exit the menu.
• The correct date and time are now set and will be stored on the photo and video properties, as
seen when connected to the computer.
• The date and time settings will reset if the battery is fully discharged or removed from the
monocular for long periods of time.

COMPUTER CONNECTION

• Connect the camera to your computer using the USB lead supplied. This plugs into the mini USB
socket located on the underside of the unit, beneath the rubber flap.
10