Power Cord; Semi Mobile - Dustcontrol DC Storm 500 Traducción Del Manual De Instrucciones De Servicio Original

Power cord

Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.
Important safety precaution
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.
Lifting
When lifting the machine, there is a risk of personal injury and damage to the machine or environment. Always define the risk
area when lifting. Always use the lifting eyes on the machine when lifting. The machine's cyclone, the discharge system and filter
must be emptied and cleaned before lifting.

SEMI mobile

When the machine is used as a SEMI-mobile device, the following must be taken into account:
• The space must be well ventilated.
• No flammable items or liquids may be stored in the same space as the machine.
• The setting up of the device must guarantee that secondary risks are eliminated.
• The machine must not be in operation after the work is finished. When vacuum cleaning is completed, the machine must be
turned off. No machine must be switched on at night.
• No hot or glowing particles may be sucked with the device.
16 DC Storm, Art.nr.94295-C