FCC CAUTION
To assure continued compliance and possible undesirable interference, ferrite cores may be used when connecting
this TV to video equipment; maintain at least 400mm (15.75 inches) spacing to other peripheral devices.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with these instructions, may cause harmful interference to radio communications; however,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired operation.
Relevant Information
Record your soundbar's model and serial number here for future reference. Keep this user manual in an accessible
location in the event settings need to be changed or service is desired.
Note: Your soundbar's serial number can be found on the box and on the rear input panel.
Model Number ____________________________________
Serial Number ____________________________________
5
2017-07-25
#:180-9109-2
(2017-08-28)