USRobotics 9111 Guía De Instalación Rápida página 9

Step Four: Power Up the Network
1. Connect the supplied power adapter to the POWER port on the
router.
2. Plug the power adapter into a standard power outlet.
3. Turn on your computer.
Step Five: Configure the Basic Connection Settings
Your Internet connection user name and password may be required for
the installation of the Wireless ADSL2+ Router. Depending on your ISP,
you may need to know some of the following information: IP Address,
Subnet Mask, Gateway/Router, DNS Servers/Name Servers, and Serv-
ice Name (optional).
Note: If you cannot find all the necessary information, contact your ISP
for assistance in obtaining this information.
1. Start your Web browser.
2. In the location or address line, type: 192.168.2.1 and press ENTER
to access the router configuration Web User Interface.
English
5