peerless-AV SGLS01 Manual De Instalación página 6

Loosely attach four 1/4-20 x 12 mm screws (L)
6
and 1/4-20 nuts (N) to display mount bracket (A).
L
Snap top cover (J) onto upright (H).
8
N
A
J
H
6 of 35
Slide display mount bracket (A) onto upright (H)
7
so that 1/4-20 nuts (N) slide into slots of upright
(H) as shown in fi gure 7 and detail 2. Slide display
mount bracket to desired position, level, then
tighten 1/4-20 x 12 mm screws (L) using 4 mm
allen wrench (R).
N
H
DETAIL 2
Insert two 1/4-20 x 12 mm screws (L) into display
9
mount bracket (A), leaving 1/8" of exposed thread
as shown in fi gure 9 and detail 3.
L
A
ISSUED: 07-28-06 SHEET #: 202-9156-15 (2014-04-09)
A
L
SLOT
H
fi g. 7
1/8"
DETAIL 3
fi g. 9