Measurement Data - Citizen CH-618 Manual De Instrucciones

c. Press"
(
1
display '888' in 3 seconds. Afterward, displays the updated
2
time. The measuring blood pressure symbol will flash on
the display and then the air pressure will automatically
pump up to 195 mmHg. If blood pressure tends to be on
the high level, the air pressure will automatically increase
to the required level for measurement. * Do not move or
talk in the midst of taking blood pressure measurement.
d. After the air pressure is increased, it will slowly decrease.
When the pulse rate is detected, HEART RATE symbol
will start flashing.
*Note!
• If the cuff does not stop inflating, remove the cuff at once.
• To interrupt the measurement, you may press the
The cuff will deflate immediately after a button is pressed.
e. After taking blood pressure measurement, the Systolic rate,
Diastolic rate and pulse rate will be on the display for 1 minute.
D. Storing, recalling and erasing measurement data:
a. Storing data: 60 measurement values for 2 users each (120
memory in total)
After each blood pressure measurement, the Systolic rate,
diastolic rate, heart rate and the time & date of specific day
will be automatically stored. The memory holds the latest
60 measurement data. If more than 60 measurements, the
memory will automatically clear out the earliest data.
1
"button. Press "
) . Press "
2
" button to select USER
" button again. All elements
13
button.