Luda Elektronik tractorCam Guia Del Usuario página 43

LCD (display)
Pair indicator
Signal indicator***
Power On/Off
Switch camera/pair with camera
** Menu Navigation
Press the menu button on the monitor or the OK button on the remote control to access
the menu. Press the down button to step through the different menu options.
Resolution: Choose between VGA(high) and QVGA(low) resolution.
QUAD: Turn this on to see all your cameras at the same time.
CAM 1,2,3,4: Explained on the next page.
Pair CAM: Use this setting when using more than one camera. See chapter 9.
System Setup:
Brightness: Set the brightness of the monitor.
Frequency: Use this setting when using the AV output, to match with the frequency of
your external display.
Factory Reset: Reset the monitor to the factory settings.
*** Signal indicator
The better the signal from the camera, the higher the frame rate will be. If choosing the
lower resolution mode, QVGA, the possible frame rate is higher than the standard VGA
mode. You can change this by pressing the QVGA button on the remote, or via the monitor
menu.
Left / Right
Down
IR sensor for remote control
Menu**
- 43 -
DE
Speaker
DK
EN
ES FR
FI
SV
FR
IT
NL
NO
PL
SV