Briteq Tornado 7 Manual De Instrucciones página 6

ENGLISH
DMX Address
Used to set the start address in a DMX
setup.
 Select "DMX address" and press
ENTER.
 Use DOWN / UP buttons to change the
DMX512 address.
 Press the ENTER button to save.
To return the previous menu, press the
ESC. button.
Reset
Used to reset the unit.
 Press the ESC. button and select the
"Reset" submenu.
 The display shows "Are you sure?"
 Press ENTER to confirm or ESC. to
discard.
To return the previous menu, press the
ESC. button again.
Note: an alternative shortcut for this
function: press the ESC. & ENTER
buttons together for 2 seconds.
Config Settings
This menu contains different settings
to configure and adapt the unit.
DMX Channel Mode
Used to select the channel mode.
 Select "DMX Channel Mode" and
press ENTER
 Use DOWN / UP buttons to select the
desired DMX channel mode.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the ESC. button.
Pan Tilt Swap
Used to swap the location of the pan
and tilt channels in the DMX-chart.
 Select "Pan Tilt Swap" and press
ENTER.
 Use DOWN / UP buttons to select ON
or OFF.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the ESC. button.
Pan Tilt Invert
OFF: Pan/tilt movement is not inverted.
ON: Pan/tilt movement is inverted.
 Select "Pan Tilt Invert" and press
ENTER.
 Use DOWN / UP buttons to select ON
or OFF.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the ESC. button.
BRITEQ
®
4/65
USER MANUAL
TORNADO 7