Briteq Tornado 7 Manual De Instrucciones página 7

ENGLISH
Pan angle Range
Used to set the maximum pan range while not in endless pan mode.
 Select "Pan angle Range" and press ENTER.
 Use DOWN / UP buttons to select 360° (1 rotation) or 720° (2 rotations).
 Press the ENTER button to save.
To return without any change or go to a previous menu, press the ESC. button.
DMX Priority *
Attention: * only available when the projector is equipped with an optional wireless DMX module!
In that case you can select if the projector is controlled by XLR or wireless DMX.
 Select "DMX Mode" and press ENTER.
 Use DOWN / UP buttons to select the desired DMX Mode:
 XLR First: if the projector receives DMX both via XLR and wireless, the XLR-input has priority. If the
XLR-input fails, the wireless DMX takes over.
 XLR Only: This standard setting while no wireless DMX-module is installed.
 Wireless Only: The unit is only controlled via wireless DMX, the XLR-input is not used.
 Wireless First: if the projector receives DMX both via XLR and wireless, the wireless DMX has
priority. If the wireless DMX fails, the XLR-input takes over.
 Wireless to XLR: this option allows you to reduce the number of units that need a wireless DMX
module. Select this option on the 1
sent to the other projectors that are connected to its XLR-output. The DMX-line can contain different
kinds of DMX-projectors, not only Tornado7.
 Press the ENTER button to save.
To return without any change or go to a previous menu, press the ESC. button.
Unlink Wireless *
Attention: * only available when the projector is equipped with an optional wireless DMX module!
This option interrupts the communication with the Wireless DMX-transmitter.
 Select "Unlink Wireless"
 Press the ENTER button to confirm.
The blue W-DMX led turns dark.
To return without any change or go to a previous menu, press the ESC. button.
Master / Slave
Used to set the unit in Master or Slave mode.
 Select "Master / Slave" and press ENTER.
 Use DOWN / UP buttons to select Master or Slave.
 Press the ENTER button to save.
To return without any change or go to a previous menu, press the ESC. button.
Sound Level
Used to set the sensitivity of the internal microphone.
 Select "Sound Level" and press ENTER.
 Use DOWN / UP buttons to select the desired sensitivity: 0 (very low) to 100 (very high).
 Press the ENTER button to save.
To return without any change or go to a previous menu, press the ESC. button.
Factory Settings
If you are lost in all the settings, use this option to return to basic settings.
 Select "Factory Settings"
 Press the ENTER button to confirm.
To return without any change or go to a previous menu, press the ESC. button.
Parameter Transmit
If you have several units working in master/slave mode, you can do all settings on the master and
send all its settings to the slave units in the DMX-chain. Saves a lot of work!
 Select "Parameter Transm" on the master.
 Press the ENTER button to confirm.
To return without any change or go to a previous menu, press the ESC. button.
BRITEQ
®
st
unit in a DMX-line. The complete wireless DMX universe will be
5/65
USER MANUAL
TORNADO 7