Connecting Your Echo Dot - Impecca ASE-250 Manual Del Usuario

CONNECTING YOUR ECHO DOT:

1. Fully charge your New Portable Charging Doc with the USB
cable and 9W adapter supplied with your Echo Dot 2
Generation.
2. On the back of the Portable Charging Doc is a silicone cover.
Pull back the Silicone cover and identify the two cables attached.
a) 3.5mm audio connector
b) micro-USB connector.
3. Align the two inputs (3.5mm Audio & micro-USB ports) on your
Echo Dot with the opening in the charging dock located behind
the
silicone cover.
4. Place your Amazon Echo Dot 2
the Docking tray located at the top of the Charging Dock.
5. Plug in the 3.5mm audio connector into the echo dot 3.5mm
port, and the Micro-USB connector into the Echo Dot Micro-USB
port.
6. Pull up and neatly re-set the silicone cover.
7. Press the power button on your new Portable Charging located
below the silicone cover and you are ready to enjoy!
To Remove the Echo Dot:
1. Open the silicone cover
2. Unplug the 3.5mm audio cable and the Micro-USB
connector.
3. Remove the Echo Dot
nd
Generation (not included) into
4
nd