Publicidad
Idiomas disponibles
Idiomas disponibles
Power connections
-
Connector for the wind turbine: there are 3 MC4 connectors for
the wind turbine. At this point the polarity is not important.
-
DC output connector: this connector is for the DC output
controlled from the interface.
-
Three-phase output connectors: these are to connect the three-
phase load. This connector is only available in the three-phase
pumping version.
-
AC input connector: this connector is for powering the interface,
which is necessary. Once the wind turbine is functioning, the unit
is powered from the turbine, which has two internal sources.
The interface has a switch to stop the turbine. This switch has the form of a
mushroom-head button. Once it has been pressed, to reset it, it must be given
half a turn clockwise.
24
Publicidad
