Publicidad
Idiomas disponibles
Idiomas disponibles
Frequent questions
1.
Can several wind turbines be installed in a single installation with
various inverters?
Yes, but you would have to check with the manufacturer of the
inverter to know whether there are any considerations that must be
taken into account.
2. Can several wind turbines be connected to one single interface?
No, this is not possible, because the interface must measure all the
parameters of the wind turbine, and if there were more than one, it
would not function correctly.
.
3. Can I install several wind turbines with a single anemometer?
No. To do this you can use the Wind Sensor Cluster, which admits up
to 10 regulators or interfaces with a single anemometer.
4. Does polarity matter in the connection of the wind turbine wires?
No, it does not matter.
5. Is polarity important in the wires that go from the interface to the
inverter?
Yes, it is very important. It is essential to place the polarity correctly,
as otherwise the unit will not work.
6. Must there be some protection between the turbine and the
regulator?
No protection is necessary. What you can do is put in a switch that
short-circuits the three phases of the turbine in order to block it
completely.
28
Publicidad
