Arming (Turning On/Setting); Disarming (Turning Off /Unsetting); Stay Arming (Partially On / Part Set); Emergency Keys - DSC PowerSeries Envoy LCD5501Z Manual De Instruccion

Arming
(Turning On/Setting)
Close all sensors (i.e. stop motion and close doors). The Ready ( ) indicator should be on.
To arm, press and hold the Away key for 2 seconds and/or enter your Access Code. The Armed ( ) indicator will turn on,
and the keypad will beep. You now have ____ seconds to leave the premises. To cancel the arming sequence, enter your
access code.
Arming Error
An error tone will sound if the system is unable to arm. This will happen if the system is not ready to arm (i.e. sensors are
open), or if an incorrect user code has been entered. If this happens, ensure all sensors are secure, press and try again.
Disarming
(Turning Off /Unsetting)
Enter your access code to disarm anytime the system is armed (i.e. Armed ( ) indicator is on).
The keypad will beep if you walk through the entry door. You must enter your code within ___ seconds to avoid an alarm
condition.
Disarming Error
If your code is not valid, the system will not disarm and a 2-second error tone will sound. If this happens, press and try
again.

Stay Arming (Partially On / Part Set)

Stay arming will bypass the interior protection (i.e. motion sensors) and arm the perimeter of the system (i.e. doors and
windows). Close all sensors (i.e. stop motion and close doors). The Ready ( ) indicator should be on. Ask your alarm com-
pany if this function is available on your system.
Press and hold the Stay key for 2 seconds, and/or enter your Access Code, and do not leave the premises.
The Armed ( ) indicator and Bypass or System indicator will turn on. The system will automatically bypass certain interior
sensors (i.e. motion sensors).

Emergency Keys

The Fire, Auxiliary and Panic Emergency keys will NOT function unless programmed and enabled by the installer.
Press the , or key for 2 seconds to generate a Fire, Auxiliary or Panic alarm. Ask your alarm company if the emer-
gency keys are available on your system.

When Alarm Sounds

The system can generate 2 different alarm sounds:
Continuous Siren = Instrusion (Burglary Alarm)
Temporal / Pulsed Siren = Fire Alarm

Intrusion (Burglar) Alarm Continuous Siren

If you are unsure of the source of the alarm, approach with caution !
If the alarm was accidental, enter your Access Code to silence the alarm. Call your central station to avoid a dispatch.
8