Troubleshooting; Malfunction Causes And Remedies - Silvercrest KH 997 Instrucciones De Uso

NOTE
Should the charging proccess not function as described try to
reset the Power Pack to its factory default settings by pressing
the RESET button 5.
► Carefully press the RESET button
clip. The RESET button 5 is recessed to avoid an inadvertent
resetting of the Power Pack.
GB
MT

Troubleshooting

Malfunction causes and remedies

The following table will help with localizing and remedying minor
malfunctions:
Defect
The connected
device will not
charge.
64
Possible cause
The voltage of the
device does not match
that of the Power Pack.
Defective connection
between the device and
the Power Pack.
The wrong plug connec-
tion attachment is being
used.
Power Pack voltage is
too low.
5 with the help of a paper
Solution
Consult the operating
instructions for the
device.
Make sure that the USB
cable u is correctly
connected to the device
and the Power Pack.
Check the plug connec-
tion attachment and, if
necessary, exchange it
for another.
Recharge the recharge-
able battery pack.
KH 997