D-Link DAP-2610 Guía De Instalación Rápida página 5

Solid wall or ceiling
Installation
1. Place the mounting bracket on a wall or
ceiling.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
D-Link DAP-2610 Quick Install Guide
4. Use the supplied screws to attach the
mounting ring to the wall.
5. Plug the Ethernet cable into the LAN
port on the access point.
6. To attach the access point to the
mounting bracket.
5