Troubleshooting - Ghibli 5 Serie Uso Y Mantenimiento

EN
PROBLEM
The machine does not start
up when the key is turned.
The brush doesn't turn.
The suction unit does not
function.
The machine does dry
properly, leaving traces of
water on the floor.
No water comes out.

TROUBLESHOOTING

CAUSE
Low battery.
Main fuse blown.
Movement set to neutral.
Recovery tank full.
Level sensors dirty.
Aspirator off.
Aspiration tube blocked.
Recovery tank full.
Squeegee rubber blades
worn.
Tank empty.
Water flow adjuster is on
"0".
Filter clogged.
Pump solenoid valve not
functioning.
EN - 36
SOLUTION
Check that the battery is
charged.
Replace the fuse found on
the battery cable.
Engage forward or reverse
movement.
Empty the tank.
Clean the recovery tank's
level sensors with a damp
cloth.
Start up the aspirator.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Empty the recovery tank.
Replace or turn over the
squeegee rubber blades.
Fill the tank.
Turn water flow adjuster.
Clean the filter.
Call technical assistance.