US
User Guide
GENERAL SAFETY
INSTRUCTIONS
• Packaging is not a toy.
• Always stack your cart in such a
way that you are able to grip the
upper handle with your hands.
• For safety reasons, do not exceed
the maximum load of 330.7 lbs
(150 kg).
• Be sure to load the cart evenly for
safe operation – especially at the
sides.
• Keep the center of gravity of the
load as low as possible by placing
heavier items underneath lighter
ones.
• Please be sure that the load can't
slip or fall when being transported.
• For this purpose straps are recom-
mended for securing loads.
• Please be careful that nobody is
standing in the way when negotia-
ting steps or steep declines.
• Do not use the cart for transporting
people.
• Do not use the cart if damaged.
4
1. COMMISSIONING -
WHEEL ASSEMBLY
The four roller castors must be added
before usage. The self-locking nuts
(locknuts) ① prevent the screw fixtures
from loosening during "bumpy"
transportation. It is, therefore,
recommended to check that they are
secure from time to time and to make
any necessary adjustments ②.
①
2. UNFOLDING THE
FRAME HANDLE
In order to release the handle into
the horizontal position, the cart
frame should be pushed downwards
③. Two retaining springs bring the
frame into a resting position once
again. When in a vertical position
and when unfolded the handle
element and handle snaps audibly
into place ④.
③
④
②