Display System; Adjust General Settings - NORAUTO NS-312 BT MFI Manual De Uso

Setup

Display System

1. Touch the upper left corner to display the main menu.
2. Touch [ ].
The settings menu is displayed.

Adjust General Settings

1. Touch [ General ], if necessary.
2. Touch to highlight a setting.
3. Touch to display/select an option.
4. Touch blank area of the screen to exit.
General settings Options
USA/Asia/Japan/Europe/Eur LW/
Radio region
Oirt
Local
Radio range
Distance
On
Beep
Off
Calibration Start
Calibration
When the touch operation is not sensitive or valid, you should calibrate the touch screen using the
calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Yes ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will move automatically.
4. Aim at center of [ + ], follow the path as shown in the figure. Once steps 1-4 are complete the
system will automatically exit calibrating mode.
Description
Select one that matches your location.
Select Local to receive only stations with extremely
strong signal.
Turn on the beep sound. Each time you press a button,
the unit beeps.
Turn off the beep sound.
Calibrate the touch screen.
96