Messages; A Message Is Being Displayed; Displaying The Error Memory - Siemens VDO MTCO 1324 Instrucciones De Servicio

Messages

The MTCO 1324 monitors the functioning of
the system and automatically signals any fail-
ure occurring in one of the components, the
device or the handling. Messages and notes
may be shown in the display immediately af-
ter having closed the drawer or when the fail-
ure occurs.

A message is being displayed

1
• The function monitor
cating instrument or E-Tacho is lit up,
• an exclamation mark (2) will appear next
to the total kilometre reading in the
MTCO 1324 display and ...
• depending on the error type either the
complete time display (3) is flashing or the
colon between the digits will stop to flash.
• Additionally, the error is recorded in an
electronical memory, ➥ see "Displaying
the error memory".
• Some failures are also documented by the
MTCO 1324 on the chart, ➥ see page 39.
32
3
2
(1) at the indi-

Displaying the error memory

To find out the reason for the error message
please refer to the ERROR MEMORY menu.
The display ERROR MEMORY func-
tion may only be selected if the vehicle
is at a standstill!
= Depress key shortly
= Depress key for a longer interval
 Select the ERROR MEMORY menu by
shortly depressing the
 Via
or , other active errors may
be displayed.
Symbol with error code
Other error messages available
 Call up the basic display again,
– Depress
seconds
– or do not depress any key for 20
seconds.
key twice.
Error start
key for more than 2
Kienzle MTCO 1324