Using The Front Panel Application - Worldcast Systems ECRESO FM 750W Guía Rápida

CONFIGURATION USING THE FRONT PANEL

5. Using the front panel application

!
Press the Local button on the front panel: the transmitter must be in local mode before
parameters can be modified.
Three keys allow you to browse through the menus:
With the and keys, go from one screen to the next or rather from one command to the next: if 2
commands are available on a single screen, press
A command is selected when an arrow is visible before its name.
Example:
1 F R E Q
-> 9 8 . 0 0
The frequency is selected
The and keys are also used to adjust values after the edit mode has been enabled.
To adjust a value, set each character at a time. Text values are set from left to right; number values are
set from right to left.
ENTER
The button is used to:
• Access a lower level menu
• Enable the edit mode for parameters that can be modified
• Confirm a new value
• Return to the higher level menu
• Return to the main screen when pressed for a few seconds
Some menus include sub-menus. To make it easier to browse through the menus and locate the
information, a small number is visible on the top left of the screen; it gives you the level of the menu you
are viewing (1 or 2).
If a text string is longer than the screen, press the

Two working modes are available on the front panel: the Easy mode only displays the most used
menus and the Expert mode displays all menus. The transmitter's default mode is the Easy mode.
Please read the transmitter manual for more information.
P F W D
7 5 0
ENTER
ENTER
twice to go to the next screen.
1 F R E Q
9 8 . 0 0
The power is selected
key to access the text string and
English version
P F W D
-> 7 5 0
to scroll.
5