BZ-TECH Bematech DC-2000 Manual Del Usuario página 42

4.To set the Input Device, press the left or right arrow buttons to select from
the following options and press Enter to confirm:
•
Scan Only: Input by scanning barcodes only.
•
Keyin + Scan: Input by key in and scanning barcodes.
•
Keyin Only: Input by key in only.
5.Set the field length by entering the minimum and maximum field length from
1 to 32. Press Enter to confirm.
6.Set the Prompt by entering a message. 16 maximum characters are allowed.
Press Enter to confirm.
7.Enter Field Editing to prompt how many kinds of character you can use,
and what they are. For example, if the data you are going to input in a certain
field contains 4 alphabetical characters, of which the first one is an upper
case character and the others lower case ones, you input "ulll." Please see the
following table for symbols you can use.
Editing
n
d
a
u
l
c
p
*
The characters represented by "*", such as the check character(s) in the barcodes,
will be deleted when the data is stored. Characters other than the symbols
mentioned above (n, d, a, u, l, c, p, *) will be regarded as format symbols.
8.Continue from the previous step when necessary; press the left or right arrow
buttons to select the Insert to Data options. This option is to specify if the
format symbols such as "/" should be stored as a part of the data to be input in
the field. For example, "123110" input as a "date" will be displayed as 12/31/10 if
you check this option.
•
Display Only: Display special characters only .
•
Yes. Add it: Add special characters to data.
number 0 ~ 9 and + , -
number 0 ~ 9
all Alpha characters A ~ Z , a ~ z
upper case Alpha characters A ~ Z
Lower case Alpha character a ~ z
Full ASCII characters
printable ASCII characters, ASCII code(32 - 127)
Remove control character
User´s Manual DC - 2000 - Ver1.0
Meaning
41