BZ-TECH Bematech DC-2000 Manual Del Usuario página 46

3.Enter the new password and press Enter.
4.Enter the new password again to reconfirm and press Enter.
Date Mode
1.Select "System Menu>3.Setup>2.System Setup>3.ID/PW/DateMode>3.Date
Mode" to enter the setup.
2.Use the left or right arrow buttons to change the date mode: MM/DD/YYYY,
DD/MM/YYYY, MM/DD/YY, or DD/MM/YY. Press Enter to confirm.
Barcode Setup
Select "System Menu>3.Setup>3.Barcode Setup" to open Barcode setup. The
following options appear:
Basic Set
Select "System Menu>3.Setup>3.Barcode Setup>1.Basic Setup" to enter the
setup. The following options appear:
EAN/UPC
1.To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2.When EAN/UPC is set to "ON", pressing M2 will lead to more options:
•
UPC-A Digits: 11, 12, 13.
•
UPC-E Digits: 6, 7, 8.
•
UPC-E to UPC-A: On, Off.
•
UPC/EAN ADD 5: No Send, Send.
•
UPC/EAN ADD 2: No Send, Send.
Select the appropriate parameters and press Enter to setup the next
symbology.
Code 39
1.To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2.When Code 39 is set to "ON", pressing M2 will lead to more options:
•
Code 39 ST/SP: Send, No Send.
•
Code 39 CKD: Send, No Send.
•
Italian Pharmac: On, Off.
•
Pharmac. Add 'A': No Add, Add or No Add.
User´s Manual DC - 2000 - Ver1.0
45