Avaya AP-3 Guía Del Utilizador página 257

Table 7-1 Parametros de Configuración (Continued)
Parámetro
configurable predeterminados
5.Partner MAC 00.00.00.00.00.00
Address
Status disable (2)
(inhabilitar)
6.Partner MAC 00.00.00.00.00.00
Address
Status disable (2)
(inhabilitar)
Interfaces Parameters - Wireless Slot B with 5 GHz
(802.11a) card
Physical Layer OFDM
Type
Network Name My Wireless
Network A
Auto Channel enabled on reboot
Select (ACS)
Frequency US/CAN: 52 -
Channel 5260 MHz
Japan: 34 - 5170
MHz
RTS/CTS Medium 2347 (inhabilitar)
Reservation
DTIM Period 1
Transmit Rate 0 - Auto Fallback
Interfaces Parameters - Wireless Slot B with 2.4 GHz
(802.11b) card
Physical Layer DSSS
Type
Avaya Wireless AP-3 User's Guide
Valores Valores de mi
sistema
de fabricá
(Mbits/s) > set wif 4 txrate <6, 9, 12, 18, 24, 36, 48, 54>
Sintaxis del parámetro CLI
> set wdstbl 3.5 partnermacaddr <MAC
Address>
> set wdstbl 3.5 status <1=enable,
2=disable>
O
> set wdstbl 3.5 <enable, disable>
> set wdstbl 3.6 partnermacaddr <MAC
Address>
> set wdstbl 3.6 status <1=enable,
2=disable>
O
> set wdstbl 3.6 <enable, disable>
> show wif
> show wif
> set wif 4 netname "Nombre de red para la
Tarjeta PC de la Ranura B"
> set wif 4 autoselect <enable, disable>
MHz > set wif 4 channel <in the US: 36, 40, 44, 48,
52, 56, 60, 64 - in Japan: 34,38,42,46>
Note: Al configurar el WDS, Auto Channel
Select (Selección automática de canal) debe
estar inhabilitada.
> set wif 4 medres <0 - 2347 -
2347=inhabilitado)>
> set wif 4 dtimperiod <1 - 65355>
> show wif
> show wif
7-7