Technical Specifications; Part Number Matrix And Accessories; Dimensions - BriskHeat X2 Manual De Instrucciones

Technical Specifications

Thermocouple 2 types
Standards: IPTS/68/DIN 43710
CJC rejection: 20:1 (0.05°/°C) typical
External resistance: 100Ω maximum
Calibration accuracy: ±0.25%SM ±1°C (SM = sensor maximum)
Sensor Range: J Type: 0°C (32°F) to 800°C (1472°F), Linearity 0.5
K Type: -50°C (-58°F) to 1200°C (2192°F), Linearity 0.25
RTD Type: -200°C (-273°F) to 400°C (752°F), Linearity 0.25
Sampling frequency: Input 10Hz, CJC 2 sec.
Common mode rejection: Negligible effect up to 140dB, 240V, 50-60Hz
Series mode rejection: 60dB, 50-60Hz
Temperature coefficient: 150ppm/°C SM
Reference conditions: 22°C ±2°C, rated voltage after 15 minutes settling time.
Display: 4 Digits, high brightness Green LED, 10mm (0.4") high.
Digital range: -199 to 9999
Hi-res mode: -199.9 to 999.9
Keypad: 3 elastomeric buttons
LED output indicators: SP1 round, green or red; SP2 round, green or red

Part Number Matrix and Accessories

PART NUMBER MATRIX:
X2 - XXX Y Z E
Accessories:
TAJN05-AA Type J Thermocouple; mini connector; 5ft (1.5m)
TAJN10-AA Type J Thermocouple; mini connector; 10ft (3.0m)
TAKN05-DA Type K Thermocouple; mini connector; 5ft (1.5m)
TAKN10-DA Type K Thermocouple; mini connector; 10ft (3.0m)
X2RTD-013 Pt100/RTD-2; 13ft (4.0m)
®
© BriskHeat Corporation. All rights reserved.
X2 Benchtop
PID Digital Temperature Controller
BLANK (NORTH AMERICA)
E (EUROPE)
CONFIGURATION / OPTIONS
TABLE TOP (T)
INCLUDES STAND CLAMP (S)
THERMOCOUPLE / SENSOR INPUT
J TYPE (J)
K TYPE (K)
PT100/RTD-2 (R)
TENSIÓN DE ENTRADA
120 V CA (120
240 V CA (240)
5

Dimensions

®
© BriskHeat Corporation. All rights reserved.
X2 Benchtop
PID Digital Temperature Controller
FRONT
REAR
6