Using The Trolley; Extending The Load Platform; Closing The Trolley - Workzone AET14 Manual Del Usuario

Operations

Using the trolley

− Hold the handle with both hands and then push the trolley forward.
− Press the locking levers
fig. D).

Extending the load platform

NOTICE!
Risk of damage!
Only use the trolley with the load platform fully closed or
extended.
− Always secure the load platform with the security clamp to
prevent unintended opening or closing.
1. Disengage the security clamp
approximately 90° (see step 1 in fig. E).
It should rest on the horizontal brace of the trolley.
2. Pull the front and rear load platform sections apart until the horizontal
braces meet (see step 2 in fig. E).
3. Re-engage the security clamp by turning it another 90° so that it overlaps
the two horizontal braces (see step 3 in fig. E).
To close the extended load platform, disengage the security
clamp, then push the front and rear load platform sections
together and finally re-engage the security clamp.

Closing the trolley

To close the trolley:
1. Press the rear guard
2. Press the rear guard downward again and push the rear guard and handle
assembly forward until it closes (see step 2 in fig. F).
The trolley is now closed (see step 3 in fig. F).
12
5
on the two swivel castors to lock the trolley (see
10
by lifting it up and turning it
2
and handle
1 downward (see step 1 in fig. F).