OK International MFR Serie Guia Del Usuario página 4

Contents and Identification of Features
MFR-PS1K
Channel
LED
MFR-HPS
See inserts for relevant hand-piece operating instructions
Initial Setup & Operation.
1. Connect hand-piece(s) to power unit output connector(s).
2. Insert your selected tip (cartridge) into the hand-piece. Push the tip (cartridge) all
the way until it seats (See instructions supplied with each hand-piece).
3. Place hand-piece(s) into associated workstand(s).
4. Add distilled water to workstand sponge (sulfur free).
5. Select the desired channel using the selector switch.
6. Plug the power cord into a grounded wall socket of the rated input line voltage.
7. To turn the unit on, push the AC power switch. The AC power LED should light up
in green.
Always use tip removal pad for changing tips.
www.okinternational.com
Power LED
Output
Connector
Channel
Switch
MFR-HSR
MFR Rev. 2/13/2006
AC Power
Switch
MFR-HPT
MFR-WSSR, or WSPT
MFR-HST
2