brennenstuhl L903 IP 55 Manual Del Usuario página 8

079612 BA_LED-Strahler L903 07.05.13 12:04 Seite 8
User Manual
TIME
Use the motion detector's TIME control knob to set the On time
between approx. 5 seconds and 7 minutes after detecting the last
movement.
LUX
The light setting determines at which ambient brightness the light
system switches on.
Wait until the desired ambient brightness is reached.
• Turn the LUX control knob completely toward the
• Now turn the control knob slowly towards the  icon until the light
switches on motion-controlled.
• The light will now turn on at the set brightness.
Specifications
Technical data:
Mains power:
Output:
Standby:
Protection class:
Operating temperature: –20°C - +50°C
External lighting:
L903 PIR IP 55 only:
Motion detector:
Detection range/angle: Up to 10 m / up to 140° (horizontal)
Time setting:
Disposal
Do not dispose of electrical appliances with the household waste!
According to European directive 2002 / 96 / EG for waste
electric and electronic appliances and national implementation
waste electric appliances must be collected separately and must be
environmentally friendly recycled. Enquire at your municipally
collection points for waste electric and electronic appliances.
8
L903 IP 55 / L903 PIR IP 55
L903 IP 55:
L903 PIR IP 55:
L903 IP 55:
L903 PIR IP 55:
approx. 0.6 W
IP 55
Do not connect external lights
Passive infrared sensor
5 sec to 7 min
icon.
220-240 V~ 50 Hz
220-240 V~ 50 Hz
25,5 W
25,5 W