Ceiling Installation - Kohler K-922 Guia De Instalacion

Spout
Intake Pipe
Assembly

4. Ceiling Installation

- Install a 2x4 for support in the location where the spout will be
mounted. Position the 2x4 support 3 3/4" (9.5cm) from the bottom
of the joist.
- Install the spout assembly to the 2x4 using two wood screws
inserted at the angles shown through the holes in the back plate.
- Remove the boot cap covering the end of the intake pipe.
- Remove the mounting sleeve and cartridge.
- Solder the intake pipe to valve outlet tubing.
E
1006741-2-
Back
Plate
2x4
Screw
3-3/4"
(9.5cm)
8
Kohler Co.