Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 8: (SEE FIGURE 8)
1.
Position the wheel support assembly upright. Place
a wheel snugly against the rear of the wheel support
assembly, ensuring no holes are obstructed. Place
the second wheel slightly in front of the wheel support
assembly to support the poly tray in step 9.
FIGURE 8
STEP 9: (SEE FIGURE 9)
1.
Attach the poly tray to the wheel support using eight
5/16" x 2-1/2" hex bolts (A) and 5/16" nylock nuts (H).
2. Set the wheels aside.
A
H
FIGURE 9
STEP 10: (SEE FIGURE 10)
1.
Position the poly tray as shown in figure 10. Attach
the wheel support braces (4) to the wheel support
using two 5/16" x 2-1/2" hex bolts (A), 5/16" washers
(W), and 5/16" nylock nuts (H). Hand tighten.
FIGURE 10
STEP 11: (SEE FIGURE 11)
1.
Position the latch stand (3) under the poly tray and
align the holes in the tray, the latch stand, and the
wheel support braces (4).
3
4
FIGURE 11
6
A
W
4
H
Publicidad
Tabla de contenido
