Lutron SERENA CS-EDU3-SYJ Manual De Usuario página 13

4-Group RF Remote Control
Shading Solutions
Models CS-YJ-4GC-WH, CS-YK-4GC-WH • Setup Guide—Please Read Before Operating
Device Description
Models: CS-YJ-4GC-WH, CS-YK-4GC-WH
3 V- 50 mA
The Lutron 4-Group RF remote control is a flexible and easy to use
®
device that allows the user to control Lutron wireless shades from
®
anywhere in the space. This battery-operated control requires no
external power or communication wiring.
• Provides control of Lutron shades in the following systems:
®
– Standalone
ƒ Serena RF Remote Control Honeycomb and Roller Shades
®
ƒ Sivoia QS Triathlon Honeycomb and Roller Shades
® ®
ƒ Sivoia QS Wireless shades
®
– HomeWorks QS systems (CS-YJ-4GC-WH only)
®
– RadioRA 2 systems (CS-YJ-4GC-WH only)
®
– Lutron Smart Bridge (CS-YJ-4GC-WH only)
®
• Battery-powered; requires no wiring
• Backlit buttons clearly indicate which Shade Group is selected
• 7-year battery life (two AAA alkaline batteries included)
Open button
Tap once: shade
Raise & Lower
opens to its upper limit
buttons
Press and hold to
move the shade
Close button
Tap once: shade
closes to its lower limit
Favorite button
Tap once to move
the shade to a
favorite position
Shade Group All Shades
buttons button
Tap once to select Tap once to select
shades assigned to all shades
the corresponding
group (number)
The Lutron 4-Group RF remote control
®
is safe for use around baths and spas.
NOTICE: DO NOT submerge in water.
Lutron Electronics Co., Inc.
02/2015
7200 Suter Road
P/N 045411 Rev. D
Coopersburg, PA 18036-1299, U.S.A.
• This setup guide provides basic instructions for assigning and using the Lutron
• To assign and use the remote control in a RadioRA 2 system, use the RadioRA
®
• To assign and use the remote control in a HomeWorks QS system, use the HomeWorks
®
• To use the remote control with Lutron Smart Bridge, use the Lutron
®
Assignment to a Serena or Sivoia QS Triathlon
® ®
Honeycomb Roller
LED ON
1. Tap the Shade button. 2. The Shade button
illuminates.
Removing and changing Shade Group assignments:
a. To remove the assignment of a particular shade to a Shade Group button, restore the shade to its factory default settings according to the instructions
included with the shade.
b. To change the Shade Group button to which a particular shade is assigned, follow step a. above to remove the original assignment, then follow the
steps under Assignment to a Serena or Sivoia QS Triathlon
® ®
Setting or Adjusting Serena or Sivoia QS Triathlon
® ®
Honeycomb Roller
LED ON
1. Tap the Shade button. 2. The Shade button
illuminates.
5. Use the Raise and Lower buttons 6. SET UPPER LIMIT
to position the shade at the
With the shade at the
preferred upper or lower limit.
preferred upper limit, press
and hold the Open button.
Setting a Serena or Sivoia QS Triathlon Shade Favorite Level
® ® ®
IMPORTANT: The Favorite Level
function applies to Shade Groups.
• An individual Favorite Level can be
set for each of the 4 Shade Groups.
• A 5th Favorite Level can be set for
All Shades.
• A shade that belongs to multiple
groups will move to the Favorite
Level set for the Shade Group that 1. Tap the desired Shade
is active when the Favorite button Group button or the
is pressed. All Shades button.
4-Group RF Remote Control with Lutron shade products in stand-alone applications.
® ®
2 Essentials or Inclusive software.
®
QS Design and Programming software.
®
App.
®
Shade
®
LED FLASHING LED ON LED FLASHING
3. Choose a Shade Group 4. The Shade
button. Press and hold. button flashes.
Assignment is
complete.
Shade, and choose a different Shade Group button at step 3.
®
Shade Limits
®
LED ON LED FLASHING
LED FLASHING
4. The Shade button
3. Press and hold the Open
and Raise buttons. flashes, then
stays on.
LED ON
OR
SET LOWER LIMIT
With the shade at the
preferred lower limit,
press and hold the
Close button.
LED ON
2. Use the Raise and Lower 3. Press and hold the
buttons to position the Favorite button.
shade(s) at the desired
favorite level.
Assignment to Lutron
Equipped with Sivoia
Before starting, verify that the device
drive LED is OFF, and the window
treatment is positioned at its Open Limit.
If the LED is illuminated, tap the drive's
Open button. The LED will turn off.
1. Press and hold the device drive's
Open button.
2. The drive LED flashes, then stays
5. Repeat for
on. Release the Open
additional
shade/control
assignments.
3. Tap the device drive's
(arrow button next to the LED).
4. The device drive and wireless receiver
are in assignment mode, with LED's
flashing every 4 seconds.
LED ON LED FLASHING
5. Choose a Shade Group button. Press and hold for
LED FLASHING
5 seconds.
7. The Shade button
The window treatment(s) will move a short distance
flashes. Limit set
or "wiggle," confirming successful assignment.
is complete.
6. Repeat steps 1 through 5 for additional
shades/groups to be assigned.
Removing and changing Shade Group assignments:
a. To remove the assignment of a window treatment to a Shade
Group button, restore the device drive to its factory default settings
according to the instructions included with the window treatment.
LED FLASHING
b. To change the Shade Group button to which a particular device is
assigned, follow step a. above to remove the original assignment,
4. The Shade button
then follow the steps under Assignment to Lutron
of each shade in
Treatments Equipped with Sivoia
the active Shade
Group flashes.
choose a different Shade Group button at step 5.
Favorite level is set.
Lutron, O, Serena, Sivoia, Triathlon, HomeWorks, and RadioRA are registered trademarks of Lutron Electronics Co., Inc.
English
Window Treatments
®
QS Wireless RF Receiver
®
LED OFF
button.
LED ON LED ON LED FLASHING LED FLASHING
LED ON LED FLASHING
button
LED ON LED ON LED FLASHING LED FLASHING
LED ON LED FLASHING
Window
®
QS Wireless RF Receiver, and
®