Assembly Techniques; Using Pins; Using Glazing Elements - Rion ECO Greenhouse Manual Del Usuario

vi

Assembly Techniques

Using Pins

When you see the Pin icon do the following:
1 Put a Pin1 pin on the GT1 Glazing Tool.
2 Align the pin with the indicated hole and push it in until it snaps
secure.
3 Release the GT1 Glazing Tool and continue inserting pins where
indicated.
To disassemble parts remove the pins by placing the end of the GT1
Glazing Tool into the hole of the pin and levering it out.

Using Glazing Elements

Glazing elements (RA, RB, RC, and RD) used to secure panels to the
greenhouse. Attach them to the profiles as follows:
1 Insert one end of the glazing element into the profile until it snaps
into place.
2 Push the glazing element along its length.
3 Continue until the end of the glazing element. It will snap into place.
The callout (4) shows an enlarged cross-section of the profile and
glazing element when it is seated correctly
ECO Greenhouse Assembly Instructions
1
1
2
4
3
2
3