Handsfree Operation; Operating The Telephone; Control Key - Verizon V500AM Manual Del Usuario

Verizon V500 / USA EN / A31008-M1931-R301-1-6019 / telefony.fm / 30.4.08

Operating the telephone

Call display with Caller ID/Name
If the number of the caller is stored in your
directory, you will see the caller's name.
The following is displayed in place of the
number:
u
External, if no number is transmitted,
or the caller has not subscribed to
Caller ID.
u
Withheld, if the caller has withheld
Caller ID.

Handsfree operation

You can activate the speakerphone at any
time to provide handsfree operation dur-
ing a call.
Activating/deactivating handsfree
Activating while dialing
~ d
Enter the number and press
the Handsfree key.
¤
You should inform your caller before
you use the handsfree function so that
the caller knows someone else is listen-
ing.
Switching between the earpiece and the
handsfree mode
d
Press the Handsfree key.
During a call and when listening to the
answer machine, turn handsfree on or off.
For how to adjust the volume,
see page 27.
12
Operating the telephone
Most of the keys are the same on the
handset and on the base station, so that,
with few exceptions, you can operate the
base station the same way as the handset.
Activating/deactivating the handset
a
Press and hold the End Call
key.
Activating/deactivating the keypad
lock of the handset
#
Press and hold the pound key.
appears in the display when
Keypad Locked
the keypad lock is activated.
The keypad lock is deactivated automati-
cally if someone calls you. It is re-activated
when the call is finished.

Control key

1 Control key
In the description below, the side of the
Control key (up, down), which you must
press depending on the operating
situation, is marked in black, for example,
t
for "press up on the Control key".
The Control key has different functions:
When the handset is in idle status
s
Open the directory
t
Open call log list (page 16)
In input fields
You can use the Control key to move the
t
cursor backwards or
1
s
forwards.