Forward-Facing Installation With Latch - Graco MySize Manual De Usuario

FORWARD-FACING INSTALLATION WITH
1. Pull out on handle on front of child restraint (a) and adjust to
position 2 or
Make sure rear-facing
is stored. (see fig. b, pg. 40)
2. Unhook tether from tether storage, see
page 49.
3. Place forward-facing
equipped with
For ease of installation, extend
belt to its maximum length.
4. Attach forward-facing
vehicle lower anchors (c). Belt must lie
flat and not be twisted. Pull connectors
to be sure they are securely attached (d).
5. Slide child restraint back until the
restraint is in contact with the vehicle
seat back.
6. Press down firmly in center of child restraint to compress vehicle seat cushion
while tightening
3 (b) based on your child's size.
LATCH
on vehicle seat
LATCH anchors.
connectors to
LATCH belt by pulling the adjustment belt (e).
belt
a
LATCH
CLICK!
c
e
22
LATCH
forward-facing
b
d