Important Safety Instructions - Fluval C Serie Guía De Comienzo Rápido

Ocultar thumbs Ver también para C Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3
ATTACHING "U" TUBE
1. Attach the telescopic intake tube to the "U" tube.
2. Slide the "U" tube down into its place.
Note: For deep aquariums, an additional extension tube can be purchased
separately.
REPLACEMENT PARTS
To re-order parts for your Fluval C Power Filter, please refer to the parts list below.
D
B
C-Nodes
Chemical Basket
"U" Tube
Telescopic Intake Tube
Impeller Cover Assembly
09601000 11B10
4
INSTALLING FILTER INSERTS
After preparing filter inserts, first slide the mechanical cartridge frame into the rear
of filter case with the cleaning indicator to the right. Then slide the chemical basket
and Trickle Chamber into the filter case.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
- To guard against injury, basic safety precautions should be observed, including the following:
1. For the complete enjoyment, use and understanding of this product,
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
and all-important notices on the Power Filter before using.
Failure to do so may result in damage to the unit.
DANGER
2.
— to avoid possible electrical shock, special care should be taken since water is employed
in the use of this equipment. For each of the following situations, do not attempt repairs yourself;
FLUVAL BIO-SCREEN
Rinse Bio-Screen under tap water, and place into Trickle Chamber cover.
Note: The side with the large holes must face upwards.
Activated Carbon
FILTER INSERTS MAINTENANCE
NOTE: Regular replacement of Fluval filter inserts is essential to ensure optimum filter performanc
The Fluval Poly/Foam Pad, Activated Carbon, Bio Screen and C-Nodes should be changed alternately in o
of Nutrafin Cycle Biological Aquarium Supplement onto your filter inserts each time you change the media
Impeller
Motor Unit with Seal Ring
5
To ensure optimal operating performance, the Fluval C Power Filter must be level.
1. Insert leveller into bottom of filter case.
2. Mount Power Filter onto rear of aquarium, and adjust leveller by turning it to the
required setting so that the filter sits perfectly in vertical position.
• Do not use this pump in swimming pools or other situations where people are immersed.
• This pump is suitable for use in water temperatures up to 35°C.
• Do not use this pump with inflammable or drinkable liquids.
7. This pump is suitable for
will be exposed to the weather or to temperatures below freezing.
8. Make sure an appliance mounted on a tank is securely installed before operating it, and that the electrical
connections are in accordance with data on the rating label. Do not allow pump run dry.
9. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes
or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will
not be tripped over or pulled. The connection should be carried out by a qualified electrical installer.
ATTACHING LEVELING DEVICE
INDOOR HOUSEHOLD
use only. Do not install or store the appliance where it
(Aqu
Cham
cove
Th
eq
Eu
im
di
El
da
ha

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C2C3C4

Tabla de contenido