Ce Declaration Of Conformity - Amann Girrbach ceramill matik Modo De Empleo

NOTE:
The system may only be used for the purpose
that it is intended for. When disregarding, dam-
age to property and personal injury cannot be
excluded. Any and all warranty, guarantee and
responsibility on behalf of the manufacturer
shall expire.
4.4

CE Declaration of Conformity

This system was designed and manufactured
based on careful selection of the harmonised
standards to be observed, as well as additional
technical specifications. It thus corresponds with
the state-of-the-art and ensures maximum safety.
In terms of design and performance, this product
complies with the European Directives and the
supplementary national requirements.
Conformity has been confirmed with the CE mark-
ing.
Applied harmonised
EC Directives standards
2006/42/EC DIN EN ISO 12100 2011-03
(Machinery Direc-
DIN EN 13128 2009-09
tive)
2011/65/EU (RoHS
Directive)
2004/108/EC (EMC DIN EN 61010-1 2011-07
Directive)
DIN EN 55011 2011-04
DIN EN 61000-4-4 2010-11
DIN EN 61000-4-5 2007-06
Tab. 1
The product's Declaration of Conformity can be
viewed under the manufacturer's website.
I N F O R M A T I O N O N T H E S Y S T E M
The system has been tested according to Class A
of the EMC Directive. All relevant tests were
passed and confirmed by a certified inspection
authority.
In general, it should be pointed out that interfer-
ence emissions can occur in residential areas. This
could affect:
_ Radio services within a maximum radius of 20 m
(e. g. analogue reception of radio and television,
voice radio)
_ Devices at close range (e. g. weakly shielded
devices)
A health hazard can be completely excluded at
any time.
E N
25