General Safety Instructions - Amann Girrbach ceramill matik Modo De Empleo

G E N E R A L S A F E T Y I N S T R U C T I O N S
2 General Safety Instruc-
tions
E N
When using the product, always observe the fol-
lowing safety instructions:
DANGER:
Danger of electric shock from leaking cool-
ant/lubricant.
▷ When changing the coolant/lubricant, use the
intended pumping device.
▷ When coolant/lubricant has leaked: Discon-
nect the machine from the power supply and
contact the technical service.
CAUTION:
Damage of slipping from leaking coolant/lubri-
cant!
▷ When changing the coolant/lubricant, use the
intended pumping device.
▷ When coolant/lubricant has leaked: Set up
warning signs and clean floor properly.
CAUTION:
Danger of tipping over when the drawer for the
belt filter and tank is pulled out.
▷ Do not use the drawer as a climbing aid or
seat.
CAUTION:
A defective product can lead to malfunctions!
On detection of damage or a functional defect of
the product:
▷ Label the product as defective.
▷ Prevent further operation until the product
has been repaired.
22
NOTE:
The system may only be used for the purpose
that it is intended for. When disregarding, dam-
age to property and personal injury cannot be
excluded. Any and all warranty, guarantee and
responsibility on behalf of the manufacturer
shall expire.
NOTE:
The system may only be operated in enclosed
rooms.
NOTE:
Possible damage due to insufficient load-bearing
capacity of the floor.
The set-up location and the surrounding paths
must be able to withstand the weight of the sys-
tem.
▷ Observe weight of system.
▷ Inform yourself about the building conditions
at the responsible authority (e.g. archi-
tect/structural engineer).
NOTE:
Possible machine damage through insufficient
extraction during dry processing!
▷ Operate the machine only with the extraction
system recommended by the manufacturer or
another compatible extraction system.